phone +91-9909 994 042 / 7574 839 945
FUMIGATION EQUIPMENTS
UNIPHOS 350M-Phosphine Alert PH3 Lo Gas Monitor

For detection of PH3 at TLV level, for personal protection and safety.

Click Here to Download Specification

Micro-processor based technology with high contrast, easy to read OLED display
Range: 0 - 20 ppm
Resolution: 0.01 ppm
Data logging capability with Gas_conc, TWA_conc, Date & Time information
Audible/Visual alarm
Soft power start - to avoid accidental ON/OFF
USB interface with PC
GUI for data downloading & sorting

TLV level monitoring around the fumigated space
Leak detection from the fumigation chamber




UNIPHOS Fumisense Pro PH3-Hi with inbuilt pump

These are paper strips impregnated with sensing chemicals by a special process for semiquantitative measurement of phosphine. The strip on exposure to PH3 gas changes its colour. The time it takes to change the colour is related to the PH3 gas concentration. They are used for checking the fumigated area after aeration and to see if the area is safe for entry. These strips can also be given to the workers as badges when they are working in/near fumigated stacks.

Click Here to Download Specification

Range: 0 - 2000 ppm
Resolution: 1 ppm
20x4 OLED display & inbuilt air sampling pump; can draw sample from 30m
Continuous as well as Batch sampling provision
Data logging facility with informations like Gas_conc., Warehouse no., Silo no., Date & Time.
USB interface
GUI for data downloading, sorting & report generation
Soft power start - to avoid accidental ON/OFF
GUI for data downloading & sorting

Phosphine concentration measurement during fumigation




UNIPHOS Fumisense Pro PH3-Hi (CO) with inbuilt pump

Click Here to Download Specification

Range: 0 - 1000 ppm
Resolution: 1 ppm
20x4 OLED display & inbuilt air sampling pump; can draw sample from 30m
Continuous as well as Batch sampling provision
Data logging facility with informations like Gas_conc., Warehouse no., Silo no., Date & Time.
USB interface
GUI for data downloading, sorting & report generation
Soft power start - to avoid accidental ON/OFF

Phosphine concentration measurement when CO is present along with phosphine, like in tobacco fumigation




UNIPHOS PH3 Gas Detector Tubes

Measurement Range
          0.05 - 2.5 ppm
          - 10 ppm
          50-1000 ppm
          150-3000 ppm
          300-8000 ppm
Easy to use and accurate

For the spot checking of PH3 in and around the fumigated space
PH3 detection in several measurement range
To be used with ASP-40 air sampling pump




UNIPHOS PH3 Detector Strips

These are paper strips impregnated with sensing chemicals by a special process for semiquantitative measurement of phosphine. The strip on exposure to PH3 gas changes its colour. The time it takes to change the colour is related to the PH3 gas concentration. They are used for checking the fumigated area after aeration and to see if the area is safe for entry. These strips can also be given to the workers as badges when they are working in/near fumigated stacks.

Range: 0.3 – 10 ppm
Simple semiquantitative method of PH3 detection

For the spot checking of PH3 in and around the fumigated space
PH3 detection in several measurement range
To be used with ASP-40 air sampling pump




UNIPHOS PH3 Dosimeter Tubes

Uniphos Dosimeter tube is a device which provides the CT product (DOSE) of phosphine during fumigation. Unlike normal detector tubes, phosphine enters the dosimeter tube by diffusion. The stain length obtained on the dosimeter tube which is kept in the fumigated enclosure for the entire period of fumigation gives the total dose received by the fumigated commodities.

Ranges : (1-20) X 103 ppm hrs
                    : (1-200) X 103 ppm hrs

For the spot checking of PH3 in and around the fumigated space
PH3 detection in several measurement range
To be used with ASP-40 air sampling pump




MBr Methyl Bromide

UNIPHOS 351M MBr-Lo Gas Monitor

It comes with an inbuilt sample draw pump and data logging facility with sample identity and date-time stamp. It has two models

Fumisense Pro MBr-Lo for leak detection and personal protection application
Range: 0-200 PPM | Resolution: 1 PPM

Fumisense Pro MBr-Hi for fumigation monitoring application
Range: 0-200 mg/L | Resolution: 1 mg/L

20x4 OLED display for better readability
Continuous as well as Batch sampling  provision
Data logging facility with informations like Gas_conc., Warehouse no., Silo no., Date & Time.
USB interface with PC
GUI for data downloading, sorting & report generation
Soft power start - to avoid accidental ON/OFF




UNIPHOS Fumisense Pro Mbr-(Lo/Hi) with inbuilt pump

An ideal instrument for MBr monitoring for personal protection and safety. It can also be used to detect leaks from the fumigation chamber

Click Here to Download Specification

Micro-processor based technology with high contrast, easy to read OLED display
Range: 0 - 200 ppm
Resolution: 1 ppm
Data logging capability with Gas_conc, Date & Time information
Audible/Visual alarm
Soft power start - to avoid accidental ON/OFF
USB interface with PC
GUI for data downloading & sorting


 

UNIPHOS MBr Gas Detector Tubes

For spot checking of MBr in and around the fumigated space
To be used with the ASP-40 Air Sampling Pump
Ranges:1-18 ppm, 10-100 ppm, 50-1000 ppm
Easy to use and accurate


 

KwikDraw Gas Detector Tubes

KwikDraw PH3 Gas Detection Tubes

For the spot checking of PH3 in and around fumigated space
PH3 detection in several measurement range
To be used with the Kwik-Draw Air Sampling Pump
Ranges: 0.05 - 3 ppm, 0.1 - 100 ppm, 50-2000 ppm


 

KwikDraw MBr Gas Detection Tubes

For spot checking of MBr in and around the fumigated space
To be used with the Kwik-Draw Air Sampling Pump
Ranges: 2 - 100 ppm, 200-8000 ppm


 

KwikDraw MBr Gas Detection Tubes

For spot checking of MBr in and around the fumigated space
To be used with the Kwik-Draw Air Sampling Pump
Ranges: 2 - 100 ppm, 200-8000 ppm


 

SULPHURYL FLOURIDE

UNIPHOS Fumispec – Lo

UNIPHOS Fumispec-Lo is a battery operated microprocessor based portable instrument for the measurement of SO2F2 in the range of 0-100ppm. It is mainly designed for Leak detection, during and after fumigation. Can also be used for monitoring for personal protection and safety.

Click Here to Download Specification

Battery operated handheld design
Inbuilt sampling pump
Easy-to-fit sampling probe with dust filter
Inbuilt port memory for data logging with location ID & date/time stamp
USB port for data downloading
User settable audio visual alarm
Soft power key - to avoid accidental switching of the Instrument
20x4 OLED display for better readability.




UNIPHOS Fumispec – Hi

UNIPHOS Fumispec-Hi is a fully automatic microprocessor based portable instrument specifically designed for the monitoring of fumigation using SO2F2. The working range of the instrument is 5 – 150 gm/m3 with the resolution of 1 gm/m3.

Click Here to Download Specification

NDIR sensor with temperature compensation
Inbuilt sampling pump
User settable active sampling port (Maximum 3)
User settable sampling period and sampling time.
Inbuilt memory for data logging with location ID and date/time stamp
USB port for data downloading
20x4 OLED display for better readability.
Rugged weather proof enclosure




PH3 & MBr DUAL GAS MONITOR

UNIPHOS Fumisense Dual Gas Monitor (PH3 and Mbr)

The UNIPHOS FUMISENSE is a microprocessor based Dual-Gas monitor with two separate inbuilt pump for Phosphine and Methyl Bromide respectively. This table top portable instrument can be carried from ware house to ware house and to different silos to monitor phosphine or methyl bromide concentration during fumigation. It has the provision to log the data with ware house number, silo number, sample- Location (Top, Middle & Bottom), Gas conc., Gas Name, Date & Time. It is provided with GUI to sort out the data and generate report at the end of fumigation.

Click Here to Download Specification

Ranges:PH3 : 0 - 2000 ppm (Electrochemical sensor)
MBr : 0 - 200 g/m3 (Thermal Conductivity Detector)
Advanced Microprocessor based instrument




Automatic - FOUR ZONE GAS MONITOR

UNIPHOS FUMITRACK Automatic 4 Zone Fumigation Gas Monitor

A fully automatic, 4-port, unmanned monitoring system which can make periodic measurement and keep the sensor idle between measurements after flushing it with fresh air, resulting in longer life for electrochemical sensors.

Click Here to Download Specification

Fully automatic equipment with high contrast OLED display
Range: PH3 : 0 - 2000 ppm
Fully programmable menu - once programmed can run for several cycles of operation covering entire fumigation period, without any human intervention
Data logging capability of 2000+ records with information like Cycle No., Gas conc., Site, Location, Date & Time
Inbuilt sample draw pump – can draw sample from 100 meter
Bluetooth & Rs-232 connectivity option.
GSM connectivity - SMS alert
GUI for data downloading, sorting & report generation
Housed in a tough Pelican Storm Case – weather and waterproof
Can also be available for MBr (0-200mg/L).




UNIPHOS FUMITRACK Automatic Online Fumigation Gas Monitoring System

A field mountable online fumigation gas monitoring system for detection and continuous monitoring of different fumigant gases at mitigation locations. The inbuilt multi sampling ports capable of drawing sample from a distance of 100 meters provides fumigators with an option to cover multiple Silo's from a single point. It gives a digital output signal that can be connected to any suitable control system(Uniphos controller, DCS, PLCs etc) by RS-485 MODBUS RTU. It also gives an industry standard 4-20mA analog output signal, in addition it also provides digital input/output for PLC control. It is available for Phosphine and Methyl Bromide.

The System can monitor any of the below described ranges
Ranges:PH3: 0-2000ppm & 0-20 ppm
MBr: 0- 200 mg/L & 0-200 ppm